Home > All Products > Touch Screen > SIEMENS touch > Membrane Keypad for siemens COROS OP25
  • Membrane Keypad for siemens COROS OP25
1/1
  • Membrane Keypad for siemens COROS OP25

Membrane Keypad for siemens COROS OP25

SKU: COROS OP25
The COROS OP25 represents Siemens' earlier generation of operator panels, designed for machine-level operation and monitoring .
0.0 (0 Reviews)
0 Sold
$73.00 $71.00
Received successfully
Coupon Code
CONTINUE SHOPPING
Quantity:
-
+
  • Membrane Keypad for siemens COROS OP25
  • Membrane Keypad for siemens COROS OP25
1/1
  • Membrane Keypad for siemens COROS OP25
  • Description
Membrane Keypad for siemens COROS OP25

DF1 Driver Versions (for Allen-Bradley PLC-5 compatibility)

Driver Version Description
v1.2 or earlier Accesses tags via indirectly setup data areas; crude and error-prone. NOT compatible with newer panels (OP27/OP270) -6
v2.0 or higher Uses direct address specification; easier to program. Compatible for conversion to newer panels -6

Key Features & Description

  • Legacy HMI Terminal: The COROS OP25 represents Siemens' earlier generation of operator panels, designed for machine-level operation and monitoring -6-7.

  • Known Display Issue: The OP25 is notorious for screen failures where black stripes appear on the display. Siemens offered free replacements for this issue years ago, but that program has long since ended -6.

  • Multi-Protocol Support: Capable of communicating via PROFIBUS-DP, PPI (for S7-200 PLCs), and DF1 (for Allen-Bradley PLC-5) -3-6-10.

  • Allen-Bradley Compatibility: Can connect to PLC-5 systems, but the DF1 driver version determines upgrade feasibility -6.


Software & Configuration Information

Parameter Details
Configuration Software ProTool (basic version, not "Lite") -4-6
ProTool Version for Old DF1 Driver v2.51 (last version supporting v1.2 DF1 driver) -6
Upload/Backup Capability Cannot upload application via ProSave for editing -1-4
Backup Method Backup possible only if a backup function was programmed into a screen button. Requires PCMCIA/JEIDA memory card -2-7
EPROM Option Application can be stored on EPROM (e.g., M27C1001-12F1 - 1 MBIT UV EPROM). EPROM can be physically moved to another OP25 -2
Source File Extension .pdb (ProTool project file) -4

Cables & Connectivity

Connection Type Details
Programming Cable Serial RS232 cable (e.g., 6XV1440-2K..) -1
PLC Connection (S7-200) PPI protocol via serial connection -10
PLC Connection (S5/S7) PROFIBUS-DP -3

Known Issues & Error Codes

Error Code / Message Meaning Solution
613 Specified data block (DB number, starting DW, end DW) does not exist in the controller or is too short -2 Check PLC for missing or incorrectly sized data blocks
"No connection with OP25" Communication failure between PG and OP25 Verify electrical connections and MPI/PPI settings -4
"CGA RAM: ok / DRAM test: 020000" Panel stuck in transfer mode/self-test after power failure Indicates possible hardware failure; panel may be non-responsive -8
Display stripes/lines LCD failure (common issue) Panel is obsolete; replacement recommended -6

Migration Path

The OP25 is obsolete and cannot be directly replaced with a new unit. Recommended upgrade paths:

Target Panel Requirements Notes
OP27 Requires original .pdb project file from OP25; conversion possible only if DF1 driver is v2.0 or higher -1-4-6 Also obsolete, but newer than OP25
OP270-6 Requires original .pdb project file; driver must be v2.0+ -6 Better compatibility with modern systems
New Panel (e.g., SIMATIC HMI) Complete reprogramming required; no direct conversion path Recommended for long-term supportability -6


Frequently Bought Together
more
Frequently Bought Together

CUSTOMER REVIEWS

0.0 0 Reviews
Write a review