| Series |
GPH70 (GPH = Geared Precision Helical) |
| Frame Size (Output Flange) |
70 mm × 70 mm |
| Motor Compatibility |
Servo & stepper motors (universal mounting per IEC/NEMA) |
| Gear Type |
Helical planetary gears (higher smoothness & load capacity vs. spur) |
| Backlash (Standard) |
≤12 arcmin (Precision grade: ≤3–5 arcmin available) |
| Ratio Options |
Single-stage: 3, 4, 5, 7, 10 Two-stage: 15, 20, 25, 30, 35, 40, 50, 64, 80, 100 Three-stage: up to 1000 (e.g., 125, 200, 500) |
| Max Input Speed |
6,000 rpm |
| Rated Output Torque |
~30–45 Nm (varies by stage & ratio) |
| Peak Torque |
Up to 90 Nm (short duration) |
| Efficiency |
≥96% (single-stage), ≥94% (two-stage) |
| Noise Level |
<65 dB(A) at rated load |
| Lubrication |
Lifetime grease (maintenance-free) |
| Housing Material |
Aluminum alloy (lightweight, good heat dissipation) |
| Gear Material |
20CrMnTi alloy steel, carburized & ground (ISO Grade 5) |
| Output Shaft |
Solid or hollow (keyed or clamping), radial/axial load supported |
| Protection Rating |
IP65 (dust-tight, protected against water jets) |
| Operating Temperature |
-15°C to +90°C |
| Mounting Orientation |
Any direction |