KYOCERA NEW 5.7 inch LCD Display Panel KCG057QV1DC-G500 for Industrial
| Parameter |
Specification |
Details/Notes |
| Model Number |
KCG057QV1DC-G500 |
Kyocera / Optrex Industrial Series |
| Display Type |
CSTN (Color Super Twisted Nematic) |
Transmissive, Normally Black (typical) |
| Screen Size |
5.7 inches |
Diagonal |
| Resolution |
320 (RGB) × 240 dots |
QVGA Format |
| Pixel Pitch |
~0.36 mm (H) × 0.36 mm (V) |
Standard for 5.7" QVGA |
| Active Area (AA) |
115.2 mm (W) × 86.4 mm (H) |
4:3 Aspect Ratio |
| Outline Dimensions |
Approx. 154.6 mm × 114.8 mm × 9.5 mm |
Includes bezel and touch overlay; verify "G500" drawing |
| Color Depth |
4096 colors (12-bit) |
Typical for CSTN; dithering may simulate more |
| Interface |
Parallel (8-bit / 16-bit) |
TTL/CMOS logic levels (Usually 5V) |
| Touch Panel |
4-Wire Resistive |
Integrated; requires analog ADC or touch controller |
| Backlight Type |
CCFL (Cold Cathode Fluorescent Lamp) |
Requires high-voltage AC inverter |
| Brightness |
Typically 200 ~ 280 cd/m² |
Lower than LED/TFT; sufficient for indoor use |
| Contrast Ratio |
Typ. 50:1 to 60:1 |
Characteristic of CSTN technology |
| Viewing Angle |
Limited (Top/Bottom/Left/Right ~40°) |
Narrower than TFT; best viewed straight on |
| Response Time |
Slow (>100ms) |
Not suitable for video; prone to ghosting |
| Operating Temp. |
-10°C to +50°C (Standard) or -20°C to +70°C (Wide) |
"G500" may specify wide temp; CSTN slows in cold |
| Storage Temp. |
-20°C to +60°C |
|
| Power Supply |
5.0V (Logic), High Voltage (Backlight) |
Separate inverter circuit required for CCFL |
| Connector |
Dual FPC/Board Connectors |
One for Display/Data, one for Touch/Backlight (varies by rev) |
| Compliance |
RoHS (Check specific batch) |
CCFL contains mercury; special disposal required |
The KCG057QV1DC-G500 is ideal for applications where cost, power efficiency, and durability are more critical than high-speed graphics or wide viewing angles:
-
Industrial Automation & Control:
- Legacy HMI Panels: Retrofitting or maintaining existing Human-Machine Interfaces for PLCs.
- CNC Machine Controllers: Display units for lathes and mills where screen content changes slowly.
- Textile & Packaging Machinery: Operator panels for setting parameters and monitoring status.
- Process Controllers: Temperature, pressure, and flow control units in factories.
-
Medical Instrumentation:
- Patient Monitors: Displays for vital signs (ECG, SpO2) where waveforms update at moderate speeds.
- Infusion Pumps: User interface for dosage setting and status display.
- Portable Diagnostic Tools: Handheld devices for basic health screening.
-
Test & Measurement Equipment:
- Power Supplies & Loads: Front panel displays for voltage/current readouts.
- Environmental Chambers: Control interfaces for ovens and freezers.
- Weighing Scales: Industrial bench and floor scales with graphic menus.
-
Transportation & Marine (Legacy):
- Marine Instruments: Depth sounders and basic GPS plotters (older designs).
- Vehicle Diagnostics: Handheld OBD scanners and fleet management terminals.
- Railway Signaling: Control panels inside train cabins.
-
Consumer & Commercial Appliances:
- Vending Machines: Selection screens with touch input for product choice.
- ATMs & Kiosks: Older generation self-service terminals.
- Home Appliances: High-end washing machines, dryers, or microwave control panels (legacy models).
KYOCERA
FAQ
Q: How long will I receive my goods ?
A: Generally speaking ,It will take 3-8days to your hand by DHL/FEDEX
Q:Can you give me a discount if I need a large quantity of ?
A:Of course!If you make a large order, we will give you a discount.
Q:Can I pay my order via credit card ?
A:Yes!you can use your credit card through your Paypal account.
- Q: May I ask what kind of packaging you use?
A: We use anti-static packaging and shock-resistant packaging.Anti-static packaging: Ensure that the packaging materials used comply with ESD standards, including anti-static bags and foam.Shock-resistant packaging: Use custom foam and sturdy outer boxes to ensure that they can pass through regular transportation tests (such as dropping and vibration).So the goods arrive at your hands in perfect condition.
Q: Do you conduct tests before shipment?
A: Yes, we strictly follow 100% pre-shipment testing procedures.Our testing process is standardized to ensure that every LCD panel sent to you is in compliance with specifications and is fully functional.