1/1
New GP2401-TC41-24V for PRO-FACE Touch Screen Glass
SKU: GP2401-TC41-24V
(0 Reviews)
0 Sold
1/1
| Parameter | Specification |
|---|---|
| Display Size | 4.7 inches diagonal (119.4 mm) |
| Aspect Ratio | 4:3 (Traditional) |
| Active Area | 96 mm (W) × 72 mm (H) |
| Resolution | 320 × 240 pixels (QVGA) |
| Display Technology | TFT LCD (Thin-Film Transistor, Color Active Matrix) |
| Color Depth | 65,536 colors (16-bit) |
| Brightness | 200 cd/m² (typical) |
| Contrast Ratio | 200:1 (typical) |
| Backlight Type | CCFL (Cold Cathode Fluorescent Lamp) - earlier models; Some may have LED |
| Backlight Lifetime | 30,000 - 50,000 hours (typical to half-brightness) |
| Touch Technology | Analog Resistive (4-wire, single-touch) |
| Touch Life | >1 million touches |
| Front Protection | IP65 (NEMA 4/12) when properly installed (Dust-tight, protected against low-pressure water jets) |
| Mounting | Panel mount (front), 4× mounting tabs with screw holes |
| Cutout Dimensions | 116 mm × 92 mm (4.57" × 3.62") |
| Overall Dimensions (W×H×D) | 126 mm × 102 mm × 38 mm (4.96" × 4.02" × 1.50") |
| Weight | Approx. 0.45 kg (0.99 lbs) |
| Parameter | Specification |
|---|---|
| Processor | 32-bit RISC processor (specific model undisclosed) |
| RAM | 8 MB (for runtime operation) |
| Flash Memory | 16 MB (stores OS, project, fonts) |
| User Memory | Approx. 3 MB available for project (after system overhead) |
| Clock | Real-time clock (battery-less, capacitor-backed) |
| Expansion | No memory card slot (internal storage only) |
| Interface | Specification |
|---|---|
| Serial Port 1 (Channel 1) | RS-422/RS-485 (via terminal block) • Supports Mitsubishi MELSEC FX, A, Q series PLCs • Also supports Modbus RTU (master/slave) |
| Serial Port 2 (Channel 2) | RS-232 (9-pin D-Sub female) • For connection to computer (project download), printer, or barcode reader • Also supports connection to some PLCs (e.g., Mitsubishi FX via SC-09 cable) |
| Protocol Support | • Mitsubishi PLCs: FX, A, QnA, Q series (via CPU direct or network modules) • Modbus RTU (Master/Slave) • Omron Host Link (optional driver) • Siemens S7-200 PPI (optional driver) • ASCII Device communication |
| Network Options | No built-in Ethernet; requires optional communication module (e.g., GT15-J71E71-100 for Ethernet) |
| Parameter | Specification |
|---|---|
| Input Voltage | 24 V DC (as indicated by -24V suffix) |
| Voltage Range | 20.4 V DC to 26.4 V DC |
| Current Consumption | 120 mA typical @ 24 V DC (2.9 W) 200 mA maximum (4.8 W, with backlight at full) |
| Inrush Current | < 5 A for 20 ms |
| Connection | Removable 2-pin terminal block (24V+, 0V) |
| Protection | Reverse polarity protection, overvoltage protection (up to 30 V DC) |
| Isolation | 500 V AC (between power and communication circuits) |
| Parameter | Specification |
|---|---|
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Relative Humidity | 10% to 90% (non-condensing) |
| Vibration Resistance | 5 - 8.4 Hz: 3.5 mm amplitude; 8.4 - 150 Hz: 0.5 g acceleration (per IEC 60068-2-6) |
| Shock Resistance | 15 g, 11 ms duration, half-sine wave (per IEC 60068-2-27) |
| Altitude | Up to 2000 m (6560 ft) without derating |
| Pollution Degree | 2 (per IEC 61131-2) |
| Enclosure Rating | IP65 (front), IP20 (rear) |
