Home > All Products > Touch Screen > PRO-FACE touch > GP2401H
  • for Proface New Touch Screen GP2401H
1/1
  • for Proface New Touch Screen GP2401H

New Touch Screen Glass GP2401H for Proface

SKU: GP2401H
GP2401H - 24-Bit High Precision, Low Noise, Single-Channel Σ-Δ Analog-to-Digital Converter with Enhanced Features
0.0 (0 Reviews)
0 Sold
$170.00 $168.00
Received successfully
Coupon Code
CONTINUE SHOPPING
Quantity:
-
+
  • for Proface New Touch Screen GP2401H
  • for Proface New Touch Screen GP2401H
1/1
  • for Proface New Touch Screen GP2401H
  • Description
New Touch Screen Glass GP2401H for Proface

General Description:
The GP2401H is a high-performance, low-power, single-channel Σ-Δ Analog-to-Digital Converter designed for demanding measurement applications requiring ultra-low noise and high resolution. It integrates a programmable gain amplifier (PGA), a high-order Σ-Δ modulator, and a digital filter to provide a complete front-end solution for connecting directly to low-level differential signal sources. It represents an evolution of the GP2301H with potential improvements in noise floor, offset drift, or built-in diagnostics.

Key Features & Enhancements (over basic GP2301H):

Ultra-High Resolution: True 24-bit output with no missing codes.

Superior Noise Performance: Typically features an even lower input-referred noise than the GP2301H, especially at higher gains, enabling the measurement of microvolt-level signals.

High Integration:

On-Chip Programmable Gain Amplifier (PGA): Selectable gains of 1, 2, 4, 8, 16, 32, 64, and 128. The wider range (especially mid-range gains like 16, 32) offers finer optimization for various sensor spans.

On-Chip Voltage Reference: May include a low-drift internal voltage reference (e.g., 2.048V) or an improved reference buffer, reducing external component count and improving stability.

Clock Generator: Can be driven by an external crystal or an internal oscillator.

Flexible Data Output Rates (ODR): User-selectable output data rates from 2.5 Hz to 1440 Hz (typical range), allowing optimization between resolution/noise and conversion speed.

Low Power Operation: Consumes very low power (typical < 1 mW), supporting power-down modes for battery-powered devices.

Robust Digital Interface:

SPI-Compatible Serial Interface (3-wire or 4-wire mode).

Data Ready Output (DRDY): A dedicated pin (in some packages) indicates when new conversion data is available, simplifying MCU communication.

Enhanced System Features (可能包含):

Sensor Burnout Detection: Current sources to detect open or shorted sensor conditions.

System Monitoring: Internal temperature sensor or supply voltage monitor.

Improved Offset and Gain Calibration Registers: More precise user calibration capabilities.

Electrical Characteristics (Typical @ AVDD = +5V, Gain = 128, ODR = 10 Hz, TA = +25°C):

Parameter    Symbol    Conditions    Min    Typ    Max    Unit
Supply Voltage    AVDD, DVDD    -    2.7    3.3 or 5.0    5.25    V
Supply Current    IDD    Normal Operation    -    250    400    µA
Power-Down Mode    -    0.5    5    µA
Input Voltage Range    VIN(DIFF)    Differential, Gain = 1    -VREF/Gain    —    +VREF/Gain    V
Programmable Gain    PGA    -    1    1, 2, 4, 8, 16, 32, 64, 128    128    -
RMS Noise    VNOISE, RMS    Gain=128, ODR=10 Hz    -    < 30 (Enhanced)    -    nVRMS
Noise-Free Resolution    -    Gain=128, ODR=10 Hz    -    21.5    -    bits (peak-to-peak)
Offset Error    -    Gain = 128    -    ±0.3    -    µV
Offset Drift    -    -    -    5    -    nV/°C
Gain Error    -    -    -    ±0.1    -    %
Output Data Rate    ODR    -    2.5    Programmable    1440    Hz
Internal Reference    VREF    If included    2.040    2.048    2.056    V
Interface    -    -    -    SPI with DRDY    -    -
Operating Temperature    TA    -    -40    25    +105 (或 +85)    °C
Package    -    -    -    SSOP-16, TSSOP-16    -    -
Pin Description (SSOP-16 Example):

AINP, AINN: Differential analog input pins.

AVDD / DVDD: Analog and digital power supplies (may be separate or tied together).

AGND / DGND: Analog and digital grounds.

REFIN+ / REFIN-: External reference input pins (or for buffering internal reference).

SCLK, DOUT, DIN, /CS: SPI interface pins.

DRDY/ALERT: Data ready output or alarm indicator.

CLK: Clock input/output for crystal.
Frequently Bought Together
more
Frequently Bought Together

CUSTOMER REVIEWS

0.0 0 Reviews
Write a review