Home > All Products > Touch Screen > OMRON touch > TP-3227S3
  • for Omron New Touch Screen TP-3227S3
  • for Omron New Touch Screen TP-3227S3
  • for Omron New Touch Screen TP-3227S3
1/1
  • for Omron New Touch Screen TP-3227S3
  • for Omron New Touch Screen TP-3227S3
  • for Omron New Touch Screen TP-3227S3

New Touch Screen Glass TP-3227S3 for Omron

SKU: TP-3227S3
Model number: TP-3227S3

Type: Touch Screen
0.0 (0 Reviews)
0 Sold
$45.00 $43.00
Received successfully
Coupon Code
CONTINUE SHOPPING
Quantity:
-
+
  • for Omron New Touch Screen TP-3227S3
  • for Omron New Touch Screen TP-3227S3
  • for Omron New Touch Screen TP-3227S3
  • for Omron New Touch Screen TP-3227S3
  • for Omron New Touch Screen TP-3227S3
  • for Omron New Touch Screen TP-3227S3
1/1
  • for Omron New Touch Screen TP-3227S3
  • for Omron New Touch Screen TP-3227S3
  • for Omron New Touch Screen TP-3227S3
  • Description
New Touch Screen Glass TP-3227S3 for Omron

Description:

1. Touch Technology

Parameter Specification
Technology Analog Resistive (4-wire, 5-wire, or 8-wire variant – exact type depends on submodel)
Touch Resolution 4096 x 4096 points (typical for high-end resistive)
Touch Accuracy ±1.5 mm (0.06 inches) or better
Touch Activation Force 10 to 100 grams (adjustable via controller)
Touch Durability >35 million touches (single point)
Surface Hardness 3H to 5H pencil hardness (scratch-resistant)
Light Transmission 75% to 85% (typical for resistive touch overlay)
Touch Controller Integrated or external USB/Serial controller (varies by configuration)


2. Physical & Mechanical

Parameter Specification
Dimensions (W x H x D) Approx. 370 x 360 x 65 mm (14.6" x 14.2" x 2.6") – varies by bezel design
Bezel Width Typically 20-25 mm on sides (industrial front bezel)
Weight 4.5 to 6.5 kg (10-14 lbs) depending on options
Mounting VESA 100 x 100 mm or 75 x 75 mm pattern (rear)
Front Panel Rating IP65 (dust-tight, protected against low-pressure water jets) when properly installed
Housing Material Metal (aluminum or steel) chassis with plastic front bezel
Color Industrial gray, black, or white (depends on order variant)


3. Video Input

Parameter Specification
Connector 15-pin D-Sub (VGA) standard
Supported Resolutions VGA (640x480) to UXGA (1600x1200), optimal at 1280x1024 @ 60Hz
Signal Type Analog RGB (0.7Vpp)
Sync Type Separate or composite sync


4. Touch Interface

Interface Type Specification
USB USB 1.1 or 2.0 (Type B connector for host connection)
Serial (RS-232) 9-pin D-Sub, baud rates up to 115.2 kbps
Controller Power USB bus-powered or external 5V DC (depending on model)


5. Power Requirements

Parameter Specification
Input Voltage 100-240 V AC, 50/60 Hz (internal power supply) or 12/24 V DC (external, depending on model)
Power Consumption 35-50 W typical (max with backlight at full)
Power Connector IEC C14 inlet (for AC models) or terminal block/barrel jack (for DC models)


6. Environmental Specifications

Parameter Operating Storage/Non-operating
Temperature 0°C to +50°C (32°F to 122°F) -20°C to +60°C (-4°F to 140°F)
Relative Humidity 10% to 90% non-condensing 10% to 90% non-condensing
Altitude Up to 2000 m (6560 ft) Up to 12,000 m (39,370 ft)
Vibration (operating) 5-500 Hz, 1.5 G RMS (tested per IEC 60068-2-6) -
Shock (operating) 10 G, 11 ms half-sine (per IEC 60068-2-27)
Frequently Bought Together
more
Frequently Bought Together

CUSTOMER REVIEWS

0.0 0 Reviews
Write a review