General Introduction
-
Product Category: Likely a resistive touch screen or a controller board designed for 3.5-inch TFT LCD displays. It might be a replacement part for standard industrial display modules.
-
Structure: If it is a touch panel, it typically consists of a ITO film (top layer) and ITO glass (bottom layer) separated by dot spacers. The connection interface is often a 4-wire or 5-wire FPC (Flexible Printed Circuit) with a standard pitch connector.
-
Compatibility: It is probably compatible with common 3.5-inch LCD panels that have a 4:3 aspect ratio and a standard viewing area (e.g., 70.08mm x 52.56mm). It may be used as a spare part for screens like the Ortustech COM35H3P series or similar QVGA modules.
Typical Specifications (Estimated based on standard 3.5" parts)
If this is a standard 3.5-inch resistive touch screen, the physical characteristics usually are:
-
Construction: Film on Glass (F/G) or Glass on Glass (G/G).
-
Input Method: Stylus or finger touch.
-
Surface Hardness: ≥ 3H (pencil hardness).
-
Light Transmission: Usually around 80% ± 3%.
-
Operating Force: Typically ≤ 50g (for stylus input).
-
Operating Temperature: Generally -10°C to +60°C.
Application Scenarios
This model is likely intended for repairing or maintaining older industrial equipment, such as:
-
Industrial HMI (Human-Machine Interface panels).
-
Medical Devices (Patient monitors, diagnostic equipment).
-
Home Automation Systems (Control panels).
-
Portable Test Instruments.
It would be necessary to check the actual FPC (Flexible Printed Circuit) code, connector type, and tail length against the original equipment to confirm if it matches the required part.
