TX26D211VM0BAB TFT LCD Panel Screen 10.4INCH 1024(RGB)×768 TX26D211VM0BAB For Industrial
KOE TX26D201VM0BAB
The TX26D201VM0BAB is a high-performance 10.4-inch TFT-LCD module manufactured by KOE (formerly part of Hitachi Displays). It utilizes advanced LTPS (Low-Temperature Polycrystalline Silicon) technology, which offers higher electron mobility compared to traditional amorphous silicon (a-Si). This results in higher resolution capabilities, lower power consumption, and a more compact peripheral circuit design.
This module is designed for industrial and medical applications requiring high reliability, wide viewing angles, and excellent sunlight readability. It typically features an IPS (In-Plane Switching) or wide-view optical mode, ensuring consistent color reproduction from various angles. The module integrates a WLED (White LED) backlight unit with an internal driver, supporting long operational life and stable brightness. It commonly uses an LVDS (Low-Voltage Differential Signaling) interface for video data transmission, making it compatible with standard industrial graphics controllers.
Technical Specifications Table
| Parameter |
Specification |
Details |
| Model Number |
TX26D201VM0BAB |
(Representative model for TX26D series) |
| Manufacturer |
KOE (Kristal Optronics) |
Formerly Hitachi Displays |
| Panel Type |
LTPS TFT-LCD |
Low-Temperature Polycrystalline Silicon |
| Active Area |
10.4 inch |
Diagonal size |
| Resolution |
800 (RGB) × 600 |
SVGA Resolution |
| Pixel Pitch |
0.264 (W) × 0.264 (H) mm |
Approximate |
| Pixel Arrangement |
RGB Vertical Stripe |
Standard arrangement |
| Display Mode |
IPS / Wide View |
Transmissive, Normally Black |
| Brightness |
800 ~ 1000 cd/m² (Typ.) |
High brightness for indoor/semi-outdoor |
| Contrast Ratio |
700:1 (Typ.) |
High contrast for clear images |
| Viewing Angle |
89/89/89/89 (Min.) |
Up/Down/Left/Right (CR≥10) |
| Color Depth |
16.7 Million Colors |
8-bit per color (RGB) |
| Backlight Type |
WLED (White LED) |
Edge-lit or Direct-lit depending on revision |
| Backlight Life |
50,000 ~ 70,000 hours |
Until brightness drops to 50% |
| Interface |
LVDS (Low-Voltage Differential Signaling) |
Typically 1 channel, 8-bit or dual 8-bit |
| Power Supply |
3.3V (Logic) / 12-24V (Backlight) |
Check specific datasheet for VLED |
| Operating Temp. |
-20°C to +70°C |
Standard Industrial Grade |
| Storage Temp. |
-30°C to +80°C |
|
| Dimensions |
Approx. 247 × 190 × 10 mm |
Varies slightly by bezel design |
| Weight |
Approx. 450g |
Typical module weight |
| Touch Panel |
None |
Open frame or integrated touch options available |
(Note: If "TX26D211" is a specific high-temp or high-brightness variant, the Operating Temperature might extend to -30~+80°C or Brightness to 1200+ nits, but the mechanical and resolution specs usually remain SVGA 800x600 for this 10.4" form factor.)
Specific Applications
Due to its robust LTPS construction, wide temperature range, and high reliability, this series of LCD modules is specifically targeted at demanding environments:
-
Industrial Automation & HMI:
- Used in Human-Machine Interfaces (HMI) for factory control systems.
- Machine vision displays and programmable logic controller (PLC) panels.
- Robustness against vibration and temperature fluctuations makes it ideal for factory floors.
-
Medical Equipment:
- Patient monitoring systems, ultrasound machines, and diagnostic imaging displays.
- The high color fidelity and stability are critical for accurate medical visualization.
- Long lifecycle support ensures consistency for certified medical devices.
-
Transportation & Automotive (Non-Safety Critical):
- Train passenger information displays (PID).
- Marine navigation systems and aviation cockpit auxiliary displays.
- Heavy-duty vehicle dashboards (construction, agriculture).
-
Test & Measurement Instruments:
- Oscilloscopes, spectrum analyzers, and portable calibration tools.
- Requires stable performance over long periods without burn-in or drift.
-
Legacy System Replacement:
- Often used as a direct form-factor replacement for older CCFL-backlit 10.4" displays in upgrading legacy industrial equipment to LED technology.
KOE

